Manufactured using processes that are more environmentally-friendly
Higher ratings and performance values
Easier to work with
40% less energy!
The innovative dry process by which the new generation of boards are produced
requires 40% less energy than wet processes.
Less additives!
The single-ply fibreboards require 4% binding agent content (polyurethane
resin). Both white glue (3%) for the adhesion of laminated wood layers
and latex (5%) to increase strength are not required! 2% paraffin is added
to hydrophobized fibreboards.
Biologically harmless!
All GUTEX wood fibreboard insulation boards that are made using the dry
process carry the natureplus© seal of quality
Single-ply construction, up to 200
mm thickness!
GUTEX is the only manufacturer who can provide wood fibreboard insulation
in thicknesses up to 200 mm. The boards are single-ply with homogeneous
densities throughout their cross sections.
Improved dimensional consistency!
In comparison to wet process production, the new process drastically improves
the dimensional uniformity of the boards’ length, width and thickness.
Increased strength with reduced density!
Now, even more vapour permeable!
The new insulation boards are stronger and many feature better thermal
conductivity. With an m-value of 3, the new generation of insulation boards
offers even better diffusion of moisture.
Reduced installation time!
No breaking, chipping or loss of plies!
Insulation of up to 200 mm thickness installs in a single step, saving
time and money!
Thanks to single-ply construction, separation of one ply from another
is not possible, nor can the individual plies chip or break away during
and after installation.
GUTEX Thermowall approved for thermal composite system thicknesses
up to 160 mm!
GUTEX is the first manufacturer to have its thermal composite system approved
for installation over both wood and mineral substrates in up to 160 mm
thicknesses by the German building materials and physics testing agency.
